Our European EDiS Members supply industrial hoses, tubes, mountings, and fitting couplings made out of different materials and through various processes, including fitting cross-sections. The uses are nearly endless, and so is the variety in the production of industrial hoses. Materials have a vast spectrum from PVC, to polyester up to many rubber mixtures. In most cases, several materials are merged to create the desired combination for flexibility, durability, and safety. Depending on the intended type of use, industrial hoses have to be lye or acid resistant, suitable for very high or very low temperatures, abrasion-resistant plus pressure and vacuum resistant. EDiS Members are experts in the field of industrial hoses and supplies and will help you to find the perfect solution.
The industrial water hose TUBES 2116 by TUBES International made specifically for cold and hot water usage is a general-purpose industrial hose designed for water transfer. Because of it’s working temperatures (-30°C – +120°C), the TUBES 2116 hose is widely used for hot water wash-downs, cleaning floors, and equipment. It is also suitable for outdoor usage because of its resistance to different weather conditions and abrasion.
AIR Hose 135 is an affordable and flexible multipurpose hose. The AIR hose is suitable for many uses, such as supplying air to pneumatic tools and workstations.
AIRDUC® PUR 351 EC is a polyurethane extraction and transport hose that reinforced with a textile inlay and steel spiral wiring. Due to its high abrasion resistance, the usage varies from transporting oil, petrol, or chemicals. Because of its flexibility, the AIRDUC® PUR 351 is also used for abrasive powders, dry bulk, granulate, and gases. It can be used on industrial extractors and vacuum suction cleaners. AIRDUC® PUR351 is RoHS (Restriction of Hazardous Substances) conform and can be used in potentially explosive atmospheres for methane gas extraction. It is also used for ventilation of coal mines and tunnel construction sites. This industrial hose remains flexible under cold temperatures down to -40°C and heats up to 90°C.
Construction type: Medium heavy version
Type: Polyurethane hose
Reinforcement: Textile inlay, steel wire spiral
Temperature of application area: approx. –40°C up to approx. +90°C
UniversalFLEX 25 is an industrial multi-purpose hose in the extruded version. The inner layer is made of NBR, and the cover is NBR/SBR. The electrical conductivity is R < 10^6 Ω/m. It’s black and smooth outer cover is abrasion, oil and weather resistant. This multi-purpose hose is best used for industrial oils, unleaded fuel, diesel, and heating oil as well as compressed air.
This oil resistant multi-purpose hose with a black core is specially designed for suction and pressure. The cover of the industrial hose OilspiralFLEX by REIFF is made from CR with an inner layer of NBR. Additionally, the industrial hose is reinforced with a fabric inlay and steel wire spiral. The industrial hose with a corrugated exterior and black with red markings is 40m long. Its applicable temperature range is approx. –30°C up to approx. +80°C and can withstand a pressure vacuum of 0.7 bar/20°C.
The Multi-purpose suction and pressure hose OilspiralFLEX by REIFF is oil resistant and applicable for a temperature range from approx. –30°C up to approx. +80°C and up to a pressure of 0.7 bar / 20°C. The industrial-type hose has a corrugated exterior, black and red markings, and cover of CR. The black soul inner layer is made of NBR, and it is reinforced with a textile inlay and steel wire spiral.
Limited UV- and weather resistant and flexible REIFF’s SPIRAMET PVC is a spiral hose designed for the transport and suction of fluids. Due to it is resistance against a variety of chemicals.
The WaterFlex rubber water hose from REIFF is resistant to weather and aging and is widely used in industry and agriculture. Its material is perfect for transporting hot and cold water, as well as air and low to non-aggressive chemicals.
Lundgrens Sverige’s Tricoflex industrial hose is mainly intended for water supply and delivery in industrial, as well as construction sites and road works.
Every industrial hose needs mounting; therefore, the product range is immense. The various usages of hose mounting need the best solution for every demand and every coupling. Together, our EDiS experts will help you choose the perfect fitting: stainless steel, steel, brass hose couplings.
Both products – hose and mounting – result in a functional and synchronized complete set. Our EDiS partners deliver every connecting and coupling part needed and even assemble them into complete finished sets for immediate usage. Upon request, each order is pressure checked.
Strada Dell’Alpo 26
37136 Verona, Italy
EDiS President: Robert H. Bloemers