Industrial Hoses from European Suppliers

Our European EDiS Members supply industrial hoses, tubes, mountings and fitting couplings made out of material, processes and with fitting cross-sections. The uses are nearly endless and so is the diversity in the production of industrial hoses. Materials have a huge spectrum from PVC over polyester up to different mixtures of rubber. In most cases different materials get merged with each other to create desired combination for flexibility, durability and safety. Depending on the intended type of use industrial hoses have to be lye or acid resistant, suitable for very high or very low temperatures, abrasion-resistant and pressure and vacuum resistant. EDiS Members are experts of in the field of industrial hoses and supplies and will help you to find the perfect solution. 

Selection of Industrial Hose from Our EDiS Members

Industrial Hose for Cold and Hot Water - TUBES 2116

  • External Layer: Red EPDM rubber
  • Internal Layer: Black EPDM rubber
  • Reinforcement: Polyester braid
  • Working temp.: Od -30°C do +120°C

The industrial water hose TUBES 2116 by TUBES International is specifically designed for cold and hot water usage. This general purpose industrial hose is designed for water transfer and because of it’s working temperatures (-30°C – +120°C), the TUBES 2116 hose is widely used for hot water wash-downs, cleaning floors and equipment. It is also suitable for outdoor usage, because of its resistance to different weather conditions and abrasion. 

Multipurpose Air Hose (PVC)

AIR Hose 135 is an affordable and flexible multipurpose AIR suitable for many uses such as supplying air to pneumatic tools and workstations.

AIRDUC® PUR 351 EC - Item number 10024455

  • Material: PUR
  • Resistance: <10³ Ω
  • Reinforcement: Textile inlay, steel wire spiral
  • Working temp.: ~ –40°C up to ~ +90°C
  • RoHS conform

AIRDUC® PUR 351 EC is a polyurethane extraction and transport hose that is reinforced with textile inlay and steel wire spiral. Due to its high abrasion resistance the usage varies from transporting oil, petrol or chemicals. Because of its flexibility the AIRDUC® PUR 351 is also used for abrasive powder, dry bulk, granulate and gases. It can be used on industrial extractors and vacuum suction cleaners. AIRDUC PUR351 is RoHS (Restriction of Hazardous Substances)  conform and can be used in potentially explosive atmospheres for methane gas extraction. It is also used for ventilation of coal mines and tunnel construction sites. This industrial hose remains flexible under cold temperatures down to -40°C and heat up to 90°C. 

  • High abrasion resistant
  • Good oil, petrol and chemical resistant
  • Very good coldness flexibility
  • Hose wall electrical conductivity: contact and surface resistance <10³ Ω
  • In accordance with TRGS727 and ATEX 2014/34/EU: pneumatic transport of flammable dust and dry bulk (zone 20, 21, 22 inside), breathing of flammable dust (zone 22 inside), for transport of flammable fluids (inside zone 0, 1, 2), for transport of non-flammable fluids, for application in zone 1 and 2 (gases), for application in zone 0 (gases)
  • In accordance with DIN 26057 type 2
  • RoHS conformity

     

    Construction type: Medium heavy version

    Type: Polyurethane hose

    Reinforcement: Textile inlay, steel wire spiral

    Material: PUR

    Length: 10m

    Temperature of application area: approx. –40°C up to approx. +90°C

    Colour: black

    Manufacturer: NORRES

AIRDUC® PUR 351 EC - Item number 10024455

  • Material: PUR
  • Resistance: <10³ Ω
  • Reinforcement: Textile inlay, steel wire spiral
  • Working temp.: ~ –40°C up to ~ +90°C
  • RoHS conform

AIRDUC® PUR 351 EC is a polyurethane extraction and transport hose that is reinforced with textile inlay and steel wire spiral. Due to its high abrasion resistance the usage varies from transporting oil, petrol or chemicals. Because of its flexibility the AIRDUC® PUR 351 is also used for abrasive powder, dry bulk, granulate and gases. It can be used on industrial extractors and vacuum suction cleaners. AIRDUC PUR351 is RoHS (Restriction of Hazardous Substances)  conform and can be used in potentially explosive atmospheres for methane gas extraction. It is also used for ventilation of coal mines and tunnel construction sites. This industrial hose remains flexible under cold temperatures down to -40°C and heat up to 90°C. 

Multi-purpose hose REIFF UniversalFLEX 25

UniversalFLEX 25 is an industrial multi-purpose hose in the extruded version. It’s inner layer is made of NBR and has an electrical conductivity of R &lt; 10^6 Ω/m. It’s cover outer cover is abrasion, oil and weather resistant. Best used for technical oils, unleaded fuel, diesel and heating oil as well as compressed air.

Multi-purpose suction and pressure hose REIFF OilspiralFLEX

This oil resistant multi-purpose hose is specifically design for suction and pressure. The industrial hose OilspiralFLEX by REIFF cover is made from CR with an inner layer of NBR,  additionally it is reinforced with a fabric inlay and steel wire spiral. Its applicable temperature range is approx. –30°C up to approx. +80°C and can withstand pressure vacuum of 0.7 bar/20°C.

PVC Spiral hose SPIRAMET

Limited UV- and weather resistant and flexible REIFF’s SPIRAMET PVC is a spiral hose designed for the transport and suction of fluids. Due to it is resistance against a variety of chemicals.

Rubber water hose REIFF WaterFLEX

The WaterFlex rubber water hose from REIFF is resistant to weather and ageing and is widely used in industry and agriculture. It’s material is perfect for transporting hot and cold water, as well as air and low to non-aggressive chemicals.

Rubber Water Hose Tricoflex (1039)

Lundgrens Sverige’s Tricoflex industrial hose is mainly intended for water supply and delivery in industrial, as well as construction sites and road works.

Safety Coupling Breakaway

Safety couplings for industrial hoses from Gasso primarily used for petrochemicals.

Inquiry Form for Industrial Hoses

Note: Fill in your details and we’ll get back to you in no time. Note: The required fields are marked. All other fields are voluntary. Your data will only be collected and stored electronically for processing and answering your request. Information on data processing can be found here: Privacy notice.


Message

About

EDiS is a pool of leading European distributors of industrial supplies, who utilize their knowledge to achieve a strong sales performance in their own markets. Together they pursue common purchasing activities around the world.

Contact us

EDIS G.E.I.E.
Strada Dell’Alpo 26
37136 Verona, Italy

EDiS President: Robert H. Bloemers

Search edis.eu

Get a Quote

Fill in your details and we’ll get back to you in no time. 

Note
: The required fields are marked. All other fields are voluntary. Your data will only be collected and stored electronically for processing and answering your request. Information on data processing can be found here: Privacy notice.


Message